ELECTROCOMPANIET PI 2D Owner's Manual download pdf (Page 6)

Unpacking the PI 2D

Immediately upon receipt of the amplifier, inspect the carton for possible dam-

age during shipment. If the carton is visibly damaged, a claim must be filed

with the carrier as soon as possible.

Unpack the unit carefully, and please do remember to save all packaging

materials for future shipment. The carton and packaging have been designed to

offer the safest possible protection when transporting your amplifier.

The contents of the carton

• 1 pc. Electrocompaniet PI 2D Integrated Amplifier

• 1 pc. AC power cord

• 1 pc. Owner's Manual

• 1 pc. Inspection Card

• 1 pc. Remote control

• 2 pcs. batteries.

Set up procedure

Before connecting the PI 2D to the mains, check that the main voltage

indicated on the rear panel corresponds to the line voltage in the terri-

tory where you intend to use the unit.

How to avoid damages

A good operating practice is to turn off all equipment before any con-

nections or disconnection’s are made. Do not under any circumstances

connect or disconnect equipment when power is turned on. The design

of the RCA plug generates a huge transient when inserted. Connecting

or disconnecting equipment with the power on can result in severe

damage to both speakers and amplifier.

How to avoid noise problems

The PI 2D contains delicate circuits that are sensitive to magnetic stray

fields. The unit should not be placed near main transformers, TV sets,

etc. Care should also be taken regarding placement of the interconnect

cables. Do not run interconnect cables in parallel with main cords or

speaker cables. Keep interconnect cables as short as possible.

How to avoid possible antenna problems

In some setups hum may occur when you connect the radio, VCR or TV

to your system. The problem is caused by DC voltage coming from your

antenna. Please contact your cable network operator.

Использование пульта ДУ

1. Отключение/ включение звука.

(Нажмите и удержите в нажатом

положении кнопку для перевода

устройства в режим ожидания.)

2. Кнопка CD - переключение на вход-

ной сигнал CD.

3. Кнопка TUN - переключение на вход-

ной сигнал Tuner.

4. Кнопка COAX1 - переключение на

входной сигнал COAX1.

5. Кнопка TOSLink 1 - переключение на

входной сигнал TOSLink 1.

6. Кнопка COAX2 - переключение на

входной сигнал COAX2.

7. Кнопка TOSLink 2 - переключение на

входной сигнал TOSLink 2.

8. Кнопка USB – переключение на

входной USB сигнал.

9. Кнопка AUX - переключение на вход-

ной сигнал AUX.

10. Эта кнопка неактивна на PI 2D.

11. Кнопка AMP DIM - включение/выклю-

чение дисплея.

12. Кнопка DVD - переключение на вход-

ной сигнал DVD/Blu-ray.

13. Кнопка увеличения уровня громко-

сти - Увеличивает уровень громко-

сти.

14. Кнопка уменьшения уровня громко-

сти - Уменьшает уровень громкости

воспроизведения.

15. Кнопка HT - переключение на вход-

ной сигнал домашнего кинотеатра.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

ELECTROCOMPANIET PI 2D Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Audio amplifiers ELECTROCOMPANIET PI 2D