ECT-2RF Remote ControlRev1.3 Owner's Manual
102.2 How to adjust the balance in 2-Channel - modeGo to the Preamp menu by repeatedly pressing the DEVICE button. Press the MENU button
112.3 Adjust the balance in 5.1-channel modeGo to the Preamp menu by repeatedly pressing the DEVICE button. Press the button with name MENUPr
122.4 How to view Amp DataGo to the Preamp menu by repeatedly pressing the DEVICE button. Press the button with name MENUPlease use the joysti
132.5 Monitor your bias currentGo to the Preamp menu by repeat-edly pressing the DEVICE button. Press the MENU buttonPlease use the joystick u
142.6 How to change source nameOn some products, like the EC4.8 and EC4.9, you have the option to change the name on all input sources to your own fav
152.7 How to adjust the input levelWith this function you can adjust the input sensitivity to avoid dif-ferent sources having different level of sound
16StartStep +Step -Stop3 THE IR FUNCTION3.1 How to use the IR (Infra red) functionPress DEVICE until you see the IR screen. Make sure the CDIR is ena
174 MULTI PLAYER 4.1 Normal, OSD and Div modePress Device until you come to the multi player menu:This window has different information depending on t
184.2 Normal modeIf Normal is not highlighted, press MENU until you get this mode.This is the mode to be used for all normal playing.In this mode the
194.3 OSD mode (On Screen Display)When already in Multi player win-dow, Press MENU until Osd is high-lightedYou must have a television/projector conne
2Table of contentsIntroduction ... 3Before you start to use the s
204.4 Div mode When already in Multi player win-dow, Press MENU until Div is high-lightedGenerally, this sub-menu use the joystick to let you select a
21Special function in Div modeThere are some buttons that do not have a dedicated button. To make this function available you can use the joystick w
22Div modeSpecial mode. Normal ModeUsed for operation of cd/dvd players.OSD modeOn Screen Display.Used for DVD menus.Device:Used for selection of pro
235 EC Master Control5.1 Special commandsBacklight:Select the intensity of the VFD display for all products connected to the remote controller.Use the
246 INSTALLING NEW FIRMWARE6.1 How to update the firmwareWith a personal computer you can easily upgrade the software for the remote controller. Plea
254. Detect Serial Port. When you get this window, please connect your USB cable between the computer and the product you want to update.5. Detect C
267 RESET THE SYSTEM7.1 How to reset the remote controllerIf you for some reason want to reset the ECT-2, press the following three buttons for 5 seco
28Warning:To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture.Verify line voltage before use.Do not remove cover
31 GENERAL INFORMATION1.1 CongratulationsThank you for purchasing this product, one of the most advanced remote controllers on the marked. The ETC-2
41.3 Before you start to use the systemStep 1First of all you need to activate the batteries. Please remove the plastic stick located on the right si
5How to insert the batteries:Use 3 pcs. AAA rechargeable batteries.Gently unscrew the four screws holding the top cover.Remove the top cover.Installin
61.5 Charging the Batteries The remote controller is charged through a standard USB cable, included in the package with the ECT-2. Please co
71.6 Connecting the ECT-2The remote controller uses a two way communication system. To know what product to control, the remote controller has to lea
81.7 ECT-2 IllustrationDeviceSelect the product to control and display on the screen. Preamp , IR, Multi player, TunerJoystick/selector Button used t
92 THE PREAMP MENU2.1 Select input sourceGo to the Preamp menu by repeatedly pressing the DEVICE button. Then press the joystick to the left or
Comments to this Manuals